SoilPhCheck

Soil pH in Anne Arundel, MD: Lime or Sulfur?

Typical topsoil pH in Anne Arundel, MD

Typical topsoil in Anne Arundel, MD is pH 5.05, too acidic for vegetable garden. Expect roughly 10.5 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Anne Arundel needs, by plant

What to do next

If your test confirms pH near 5.05, spread about 105 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 237,768 surveyed acres in Anne Arundel, MD, 83% are strongly acidic (below 5.5), 12% are moderately acidic (5.5-6.5), 3% are alkaline (above 7.3), 2% are near neutral (6.5-7.3). Mapped soils run from pH 3.9 to 8, a spread of 4.1 units across 444 soil components. 83% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 11.3% clay and 3.03% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 3% of mapped components carry free carbonate (lime already in the ground).

Anne Arundel against the rest of Maryland

pH 5.05 is 0.44 below the Maryland median of 5.49. 5 of 24 Maryland counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Prince George's (4.75), Garrett (4.99), Allegany (5), Baltimore City (5.03), St. Mary's (5.2), Calvert (5.31), Harford (5.33), Somerset (5.35).

The range in Maryland runs from Charles at 4.47 to Washington at 6.01; Anne Arundel sits 38% of the way up.