SoilPhCheck

Soil pH in Brooke, WV: Lime or Sulfur?

Typical topsoil pH in Brooke, WV

Typical topsoil in Brooke, WV is pH 5.71, too acidic for vegetable garden. Expect roughly 5.6 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Brooke needs, by plant

What to do next

If your test confirms pH near 5.71, spread about 56 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 37,470 surveyed acres in Brooke, WV, 73% are moderately acidic (5.5-6.5), 18% are strongly acidic (below 5.5), 9% are near neutral (6.5-7.3). Mapped soils run from pH 4.6 to 7.1, a spread of 2.5 units across 48 soil components. 73% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 19.5% clay and 4.12% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Brooke against the rest of West Virginia

pH 5.71 is 0.56 above the West Virginia median of 5.15. 51 of 55 West Virginia counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Jackson (5.43), Marion (5.44), Hancock (5.49), Berkeley (5.6), Ohio (5.72), Jefferson (5.87), Marshall (6.17).

The range in West Virginia runs from McDowell at 4.42 to Marshall at 6.17; Brooke sits 74% of the way up.