SoilPhCheck

Soil pH in Butler, KY: Lime or Sulfur?

Typical topsoil pH in Butler, KY

Typical topsoil in Butler, KY is pH 5.51, too acidic for vegetable garden. Expect roughly 7 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Butler needs, by plant

What to do next

If your test confirms pH near 5.51, spread about 70 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 225,260 surveyed acres in Butler, KY, 52% are strongly acidic (below 5.5), 26% are moderately acidic (5.5-6.5), 22% are near neutral (6.5-7.3). Mapped soils run from pH 3.6 to 8.3, a spread of 4.7 units across 209 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 20.4% clay and 2.05% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 0% of mapped components carry free carbonate (lime already in the ground).

Butler against the rest of Kentucky

pH 5.51 is 0.28 below the Kentucky median of 5.79. 20 of 120 Kentucky counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Elliott (5.49), Johnson (5.49), Simpson (5.5), Bell (5.51), Rockcastle (5.51), Breathitt (5.52), Grayson (5.52), Adair (5.53).

The range in Kentucky runs from Greenup at 5.09 to Carroll at 6.63; Butler sits 27% of the way up.