SoilPhCheck

Soil pH in Elmore, AL: Lime or Sulfur?

Typical topsoil pH in Elmore, AL

Typical topsoil in Elmore, AL is pH 5.25, too acidic for vegetable garden. Expect roughly 9.1 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Elmore needs, by plant

What to do next

If your test confirms pH near 5.25, spread about 91 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 312,625 surveyed acres in Elmore, AL, 70% are strongly acidic (below 5.5), 22% are moderately acidic (5.5-6.5), 8% are near neutral (6.5-7.3). Mapped soils run from pH 4.5 to 6.8, a spread of 2.3 units across 165 soil components. 70% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 15.3% clay and 1.41% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Elmore against the rest of Alabama

pH 5.25 is 0.1 above the Alabama median of 5.15. 44 of 67 Alabama counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Winston (5.21), Blount (5.22), Jefferson (5.22), Marshall (5.23), Franklin (5.26), Limestone (5.27), Autauga (5.29), Clay (5.29).

The range in Alabama runs from Randolph at 4.89 to Lowndes at 6.25; Elmore sits 26% of the way up.