SoilPhCheck

Soil pH in Giles, TN: Lime or Sulfur?

Typical topsoil pH in Giles, TN

Typical topsoil in Giles, TN is pH 5.48, too acidic for vegetable garden. Expect roughly 7 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Giles needs, by plant

What to do next

If your test confirms pH near 5.48, spread about 70 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 370,629 surveyed acres in Giles, TN, 53% are strongly acidic (below 5.5), 28% are moderately acidic (5.5-6.5), 19% are near neutral (6.5-7.3). Mapped soils run from pH 4.3 to 7, a spread of 2.7 units across 179 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 21.2% clay and 2.05% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Giles against the rest of Tennessee

pH 5.48 is 0.13 above the Tennessee median of 5.35. 64 of 95 Tennessee counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Houston (5.44), Warren (5.44), Haywood (5.47), Henry (5.47), Cheatham (5.49), Meigs (5.55), Obion (5.55), Hamblen (5.58).

The range in Tennessee runs from Bledsoe at 4.78 to Lake at 6.59; Giles sits 39% of the way up.