SoilPhCheck

Soil pH in Greene, NC: Lime or Sulfur?

Typical topsoil pH in Greene, NC

Typical topsoil in Greene, NC is pH 4.9, too acidic for vegetable garden. Expect roughly 4.8 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Greene needs, by plant

What to do next

If your test confirms pH near 4.9, spread about 48 lb of ground limestone per 1,000 sq ft of vegetable bed, ideally in fall.

How mixed the soil is

Of the 161,182 surveyed acres in Greene, NC, 94% are strongly acidic (below 5.5), 6% are moderately acidic (5.5-6.5). Mapped soils run from pH 4.5 to 5.5, a spread of 1 units across 67 soil components. 94% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 8.8% clay and 2.31% organic matter, which this site treats as sandy. Moving it one pH unit takes about 3 lb of lime or 1.2 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Greene against the rest of North Carolina

pH 4.9 is 0.26 below the North Carolina median of 5.16. 15 of 100 North Carolina counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Martin (4.85), Edgecombe (4.89), Lenoir (4.89), Bladen (4.9), Pender (4.91), Chowan (4.93), Robeson (4.94), Perquimans (4.95).

The range in North Carolina runs from Swain at 4.56 to Davie at 5.9; Greene sits 25% of the way up.