SoilPhCheck

Soil pH in Harrison, WV: Lime or Sulfur?

Typical topsoil pH in Harrison, WV

Typical topsoil in Harrison, WV is pH 5.43, too acidic for vegetable garden. Expect roughly 7.7 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Harrison needs, by plant

What to do next

If your test confirms pH near 5.43, spread about 77 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 211,357 surveyed acres in Harrison, WV, 49% are strongly acidic (below 5.5), 41% are moderately acidic (5.5-6.5), 9% are near neutral (6.5-7.3), 2% are alkaline (above 7.3). Mapped soils run from pH 4.1 to 7.4, a spread of 3.3 units across 123 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 21.8% clay and 2.87% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 2% of mapped components carry free carbonate (lime already in the ground).

Harrison against the rest of West Virginia

pH 5.43 is 0.28 above the West Virginia median of 5.15. 46 of 55 West Virginia counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Monongalia (5.35), Calhoun (5.37), Wood (5.4), Mason (5.42), Jackson (5.43), Marion (5.44), Hancock (5.49), Berkeley (5.6).

The range in West Virginia runs from McDowell at 4.42 to Marshall at 6.17; Harrison sits 58% of the way up.