SoilPhCheck

Soil pH in Hyde, NC: Lime or Sulfur?

Typical topsoil pH in Hyde, NC

Typical topsoil in Hyde, NC is pH 5.19, too acidic for vegetable garden. Expect roughly 15 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Hyde needs, by plant

What to do next

If your test confirms pH near 5.19, spread about 150 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 398,096 surveyed acres in Hyde, NC, 79% are strongly acidic (below 5.5), 16% are moderately acidic (5.5-6.5), 5% are near neutral (6.5-7.3). Mapped soils run from pH 4.5 to 7, a spread of 2.5 units across 108 soil components. 79% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 23.5% clay and 5.85% organic matter, which this site treats as clay. At 5.85% organic matter the soil buffers like a heavier one, which pushes it into the clay bracket. Moving it one pH unit takes about 11.5 lb of lime or 3.4 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Hyde against the rest of North Carolina

pH 5.19 is right at the North Carolina median of 5.16. 51 of 100 North Carolina counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Macon (5.13), Harnett (5.15), Hoke (5.15), Halifax (5.17), Chatham (5.21), Carteret (5.22), Moore (5.22), New Hanover (5.23).

The range in North Carolina runs from Swain at 4.56 to Davie at 5.9; Hyde sits 47% of the way up.