SoilPhCheck

Soil pH in Lake and Peninsula Borough, AK: Lime or Sulfur?

Typical topsoil pH in Lake and Peninsula Borough, AK

Typical topsoil in Lake and Peninsula Borough, AK is pH 4.83, too acidic for vegetable garden. Expect roughly 11.9 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Lake and Peninsula Borough needs, by plant

What to do next

If your test confirms pH near 4.83, spread about 119 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 1,807,267 surveyed acres in Lake and Peninsula Borough, AK, 77% are strongly acidic (below 5.5), 23% are moderately acidic (5.5-6.5). Mapped soils run from pH 3.7 to 7.3, a spread of 3.6 units across 181 soil components. 77% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 6.8% clay and 14.15% organic matter, which this site treats as loam. At 14.15% organic matter the soil buffers like a heavier one, which pushes it into the loam bracket. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Lake and Peninsula Borough against the rest of Alaska

pH 4.83 is 0.43 below the Alaska median of 5.26. 1 of 27 Alaska counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Ketchikan Gateway Borough (4.52), Skagway Borough (4.84), Kenai Peninsula Borough (4.85), Anchorage Borough (4.89), Dillingham Census Area (4.94).

The range in Alaska runs from Ketchikan Gateway Borough at 4.52 to Yakutat City and Borough at 6.08; Lake and Peninsula Borough sits 20% of the way up.