SoilPhCheck

Soil pH in Lee, AL: Lime or Sulfur?

Typical topsoil pH in Lee, AL

Typical topsoil in Lee, AL is pH 5.43, too acidic for vegetable garden. Expect roughly 7.7 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Lee needs, by plant

What to do next

If your test confirms pH near 5.43, spread about 77 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 339,842 surveyed acres in Lee, AL, 55% are moderately acidic (5.5-6.5), 45% are strongly acidic (below 5.5). Mapped soils run from pH 5 to 6.5, a spread of 1.5 units across 72 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 11.2% clay and 1.31% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Lee against the rest of Alabama

pH 5.43 is 0.28 above the Alabama median of 5.15. 55 of 67 Alabama counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Henry (5.36), Tallapoosa (5.36), Perry (5.38), Hale (5.42), Morgan (5.44), Greene (5.48), Marengo (5.48), Dallas (5.51).

The range in Alabama runs from Randolph at 4.89 to Lowndes at 6.25; Lee sits 40% of the way up.