SoilPhCheck

Soil pH in Lycoming, PA: Lime or Sulfur?

Typical topsoil pH in Lycoming, PA

Typical topsoil in Lycoming, PA is pH 5.3, too acidic for vegetable garden. Expect roughly 13.8 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Lycoming needs, by plant

What to do next

If your test confirms pH near 5.3, spread about 138 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 773,705 surveyed acres in Lycoming, PA, 56% are strongly acidic (below 5.5), 42% are moderately acidic (5.5-6.5), 2% are near neutral (6.5-7.3). Mapped soils run from pH 4.1 to 7, a spread of 2.9 units across 321 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 15.6% clay and 5.69% organic matter, which this site treats as clay. At 5.69% organic matter the soil buffers like a heavier one, which pushes it into the clay bracket. Moving it one pH unit takes about 11.5 lb of lime or 3.4 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Lycoming against the rest of Pennsylvania

pH 5.3 is right at the Pennsylvania median of 5.31. 31 of 67 Pennsylvania counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Fulton (5.26), Fayette (5.27), Monroe (5.28), Crawford (5.29), Schuylkill (5.3), Columbia (5.31), Erie (5.32), Montour (5.33).

The range in Pennsylvania runs from Forest at 4.57 to Greene at 6.07; Lycoming sits 49% of the way up.