SoilPhCheck

Soil pH in Marlboro, SC: Lime or Sulfur?

Typical topsoil pH in Marlboro, SC

Typical topsoil in Marlboro, SC is pH 5.05, too acidic for vegetable garden. Expect roughly 10.5 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Marlboro needs, by plant

What to do next

If your test confirms pH near 5.05, spread about 105 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 290,225 surveyed acres in Marlboro, SC, 79% are strongly acidic (below 5.5), 21% are moderately acidic (5.5-6.5). Mapped soils run from pH 4.2 to 6.2, a spread of 2 units across 185 soil components. 79% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 11.4% clay and 1.71% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Marlboro against the rest of South Carolina

pH 5.05 is 0.25 below the South Carolina median of 5.3. 8 of 46 South Carolina counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Dillon (5.01), Bamberg (5.02), Hampton (5.02), Horry (5.04), Florence (5.07), Orangeburg (5.08), Lancaster (5.09), Marion (5.13).

The range in South Carolina runs from Charleston at 4.8 to Beaufort at 5.92; Marlboro sits 22% of the way up.