SoilPhCheck

Soil pH in Mora, NM: Lime or Sulfur?

Typical topsoil pH in Mora, NM

Typical topsoil in Mora, NM is pH 7.25, too alkaline for vegetable garden. Expect roughly 1.8 lb of sulfur per 100 sq ft, but only after a soil test confirms it.

What Mora needs, by plant

What to do next

If your test confirms pH near 7.25, work in about 18 lb of elemental sulfur per 1,000 sq ft of vegetable bed.

How mixed the soil is

Of the 852,621 surveyed acres in Mora, NM, 53% are near neutral (6.5-7.3), 41% are alkaline (above 7.3), 5% are moderately acidic (5.5-6.5). Mapped soils run from pH 4.6 to 8.5, a spread of 3.9 units across 490 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 21.6% clay and 1.75% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 21% of mapped components carry free carbonate (lime already in the ground).

Mora against the rest of New Mexico

pH 7.25 is 0.4 below the New Mexico median of 7.65. 4 of 33 New Mexico counties have more acidic topsoil. Nationally it is more alkaline than the US county median of 6.05.

Closest in pH within the state: Colfax (6.99), Los Alamos (7.02), Taos (7.04), Rio Arriba (7.23), Catron (7.26), Cibola (7.39), Grant (7.44), Curry (7.45).

The range in New Mexico runs from Colfax at 6.99 to Valencia at 8.07; Mora sits 24% of the way up.