SoilPhCheck

Soil pH in San Jacinto, TX: Lime or Sulfur?

Typical topsoil pH in San Jacinto, TX

Typical topsoil in San Jacinto, TX is pH 5.21, too acidic for vegetable garden. Expect roughly 9.1 lb of lime per 100 sq ft, but only after a soil test confirms it.

What San Jacinto needs, by plant

What to do next

If your test confirms pH near 5.21, spread about 91 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 322,871 surveyed acres in San Jacinto, TX, 68% are strongly acidic (below 5.5), 26% are moderately acidic (5.5-6.5), 4% are near neutral (6.5-7.3), 2% are alkaline (above 7.3). Mapped soils run from pH 3.8 to 8.2, a spread of 4.4 units across 93 soil components. 68% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 14.8% clay and 1.36% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 6% of mapped components carry free carbonate (lime already in the ground).

San Jacinto against the rest of Texas

pH 5.21 is 2.22 below the Texas median of 7.43. 4 of 254 Texas counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Hardin (4.64), Jasper (5.12), Liberty (5.13), Newton (5.17), Tyler (5.21), Polk (5.23), Montgomery (5.27), Orange (5.31).

The range in Texas runs from Hardin at 4.64 to Upton at 8.19; San Jacinto sits 16% of the way up.