SoilPhCheck

Soil pH in Sequoyah, OK: Lime or Sulfur?

Typical topsoil pH in Sequoyah, OK

Typical topsoil in Sequoyah, OK is pH 5.74, too acidic for vegetable garden. Expect roughly 5.6 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Sequoyah needs, by plant

What to do next

If your test confirms pH near 5.74, spread about 56 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 429,442 surveyed acres in Sequoyah, OK, 72% are moderately acidic (5.5-6.5), 19% are strongly acidic (below 5.5), 7% are near neutral (6.5-7.3), 2% are alkaline (above 7.3). Mapped soils run from pH 4.6 to 7.9, a spread of 3.3 units across 109 soil components. 72% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 14.8% clay and 2.01% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 3% of mapped components carry free carbonate (lime already in the ground).

Sequoyah against the rest of Oklahoma

pH 5.74 is 0.81 below the Oklahoma median of 6.55. 11 of 77 Oklahoma counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: McCurtain (5.59), Mayes (5.63), Ottawa (5.63), Pittsburg (5.63), McIntosh (5.8), Atoka (5.81), Coal (5.81), Muskogee (5.86).

The range in Oklahoma runs from Adair at 5.12 to Beaver at 7.65; Sequoyah sits 25% of the way up.