SoilPhCheck

Soil pH in Snyder, PA: Lime or Sulfur?

Typical topsoil pH in Snyder, PA

Typical topsoil in Snyder, PA is pH 5.12, too acidic for vegetable garden. Expect roughly 9.8 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Snyder needs, by plant

What to do next

If your test confirms pH near 5.12, spread about 98 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 206,997 surveyed acres in Snyder, PA, 79% are strongly acidic (below 5.5), 17% are moderately acidic (5.5-6.5), 5% are near neutral (6.5-7.3). Mapped soils run from pH 3.9 to 7, a spread of 3.1 units across 355 soil components. 79% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 17.5% clay and 2.32% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Snyder against the rest of Pennsylvania

pH 5.12 is 0.19 below the Pennsylvania median of 5.31. 16 of 67 Pennsylvania counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Cambria (5.06), Somerset (5.06), Clarion (5.07), Centre (5.09), Perry (5.13), Huntingdon (5.17), Indiana (5.17), Blair (5.18).

The range in Pennsylvania runs from Forest at 4.57 to Greene at 6.07; Snyder sits 37% of the way up.