SoilPhCheck

Soil pH in Sullivan, NH: Lime or Sulfur?

Typical topsoil pH in Sullivan, NH

Typical topsoil in Sullivan, NH is pH 4.79, too acidic for vegetable garden. Expect roughly 11.9 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Sullivan needs, by plant

What to do next

If your test confirms pH near 4.79, spread about 119 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 311,217 surveyed acres in Sullivan, NH, 95% are strongly acidic (below 5.5), 5% are moderately acidic (5.5-6.5). Mapped soils run from pH 4 to 6.8, a spread of 2.8 units across 465 soil components. 95% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 5.8% clay and 5.86% organic matter, which this site treats as loam. At 5.86% organic matter the soil buffers like a heavier one, which pushes it into the loam bracket. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Sullivan against the rest of New Hampshire

pH 4.79 is right at the New Hampshire median of 4.79. 3 of 10 New Hampshire counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Belknap (4.74), Carroll (4.78), Hillsborough (4.78), Merrimack (4.79), Grafton (4.8), Cheshire (4.86), Coos (4.94), Rockingham (4.98).

The range in New Hampshire runs from Belknap at 4.74 to Strafford at 5.12; Sullivan sits 13% of the way up.