SoilPhCheck

Soil pH in Washington, AL: Lime or Sulfur?

Typical topsoil pH in Washington, AL

Typical topsoil in Washington, AL is pH 4.91, too acidic for vegetable garden. Expect roughly 11.2 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Washington needs, by plant

What to do next

If your test confirms pH near 4.91, spread about 112 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 616,785 surveyed acres in Washington, AL, 93% are strongly acidic (below 5.5), 6% are moderately acidic (5.5-6.5), 1% are alkaline (above 7.3). Mapped soils run from pH 4 to 7.9, a spread of 3.9 units across 234 soil components. 93% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 11.1% clay and 2.08% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 1% of mapped components carry free carbonate (lime already in the ground).

Washington against the rest of Alabama

pH 4.91 is 0.24 below the Alabama median of 5.15. 1 of 67 Alabama counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Randolph (4.89), Bibb (4.92), Lamar (4.93), Fayette (4.94), Baldwin (4.96).

The range in Alabama runs from Randolph at 4.89 to Lowndes at 6.25; Washington sits 1% of the way up.