SoilPhCheck

Soil pH in Washington, GA: Lime or Sulfur?

Typical topsoil pH in Washington, GA

Typical topsoil in Washington, GA is pH 5.39, too acidic for vegetable garden. Expect roughly 7.7 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Washington needs, by plant

What to do next

If your test confirms pH near 5.39, spread about 77 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 368,690 surveyed acres in Washington, GA, 51% are strongly acidic (below 5.5), 49% are moderately acidic (5.5-6.5). Mapped soils run from pH 4.6 to 6, a spread of 1.4 units across 65 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 10% clay and 1.31% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Washington against the rest of Georgia

pH 5.39 is 0.06 above the Georgia median of 5.33. 100 of 159 Georgia counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Mitchell (5.38), Montgomery (5.38), Baldwin (5.39), Emanuel (5.39), Rabun (5.4), Towns (5.4), Wilkinson (5.4), Bleckley (5.41).

The range in Georgia runs from Clinch at 4.64 to Elbert at 5.68; Washington sits 72% of the way up.