SoilPhCheck

Soil pH in Wilcox, AL: Lime or Sulfur?

Typical topsoil pH in Wilcox, AL

Typical topsoil in Wilcox, AL is pH 5.34, too acidic for vegetable garden. Expect roughly 8.4 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Wilcox needs, by plant

What to do next

If your test confirms pH near 5.34, spread about 84 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 498,598 surveyed acres in Wilcox, AL, 68% are strongly acidic (below 5.5), 22% are moderately acidic (5.5-6.5), 9% are alkaline (above 7.3). Mapped soils run from pH 4.5 to 7.5, a spread of 3 units across 107 soil components. 68% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 22.4% clay and 1.97% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 9% of mapped components carry free carbonate (lime already in the ground).

Wilcox against the rest of Alabama

pH 5.34 is 0.19 above the Alabama median of 5.15. 50 of 67 Alabama counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Limestone (5.27), Autauga (5.29), Clay (5.29), Covington (5.29), Henry (5.36), Tallapoosa (5.36), Perry (5.38), Hale (5.42).

The range in Alabama runs from Randolph at 4.89 to Lowndes at 6.25; Wilcox sits 33% of the way up.