Soil pH in Brown, IN: Lime or Sulfur?

Typical topsoil pH in Brown, IN

Typical topsoil in Brown, IN is pH 4.97, too acidic for vegetable garden. Expect roughly 10.5 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Brown needs, by plant

• Already in range: blueberries, azaleas and rhododendrons.
• Just outside, test first: potatoes (off by 0), blue hydrangeas (off by 0).
• Lime: lawn (cool-season grass) 10.5 lb/100 sq ft over 3 applications; vegetable garden 10.5 lb/100 sq ft over 3 applications; tomatoes 10.5 lb/100 sq ft over 3 applications; strawberries 7 lb/100 sq ft over 2 applications; roses 10.5 lb/100 sq ft over 3 applications; pink hydrangeas 9.1 lb/100 sq ft over 2 applications.

What to do next

If your test confirms pH near 4.97, spread about 105 lb of ground limestone per 1,000 sq ft of vegetable bed in 3 doses, ideally in fall.

How mixed the soil is

Of the 198,613 surveyed acres in Brown, IN, 74% are strongly acidic (below 5.5), 26% are moderately acidic (5.5-6.5). Mapped soils run from pH 4.3 to 7.2, a spread of 2.9 units across 165 soil components. 74% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 13.5% clay and 2.64% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Brown against the rest of Indiana

pH 4.97 is 1.38 below the Indiana median of 6.35. 0 of 92 Indiana counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Perry (5.45), Monroe (5.56), Crawford (5.62), Martin (5.66).