SoilPhCheck

Soil pH in Meigs, OH: Lime or Sulfur?

Typical topsoil pH in Meigs, OH

Typical topsoil in Meigs, OH is pH 5.36, too acidic for vegetable garden. Expect roughly 7.7 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Meigs needs, by plant

What to do next

If your test confirms pH near 5.36, spread about 77 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 267,790 surveyed acres in Meigs, OH, 47% are moderately acidic (5.5-6.5), 47% are strongly acidic (below 5.5), 7% are near neutral (6.5-7.3). Mapped soils run from pH 4.3 to 7, a spread of 2.7 units across 247 soil components. No single class covers 60% of the county, so two gardens a few miles apart here can need opposite treatments. Test your own bed.

Clay, organic matter and rates

Topsoil here averages 19.5% clay and 2.32% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. None of the mapped components carry free carbonate.

Meigs against the rest of Ohio

pH 5.36 is 0.72 below the Ohio median of 6.08. 10 of 88 Ohio counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Pike (5.3), Ashtabula (5.32), Jackson (5.34), Washington (5.34), Athens (5.52), Tuscarawas (5.53), Guernsey (5.55), Noble (5.56).

The range in Ohio runs from Monroe at 5.02 to Wood at 6.6; Meigs sits 22% of the way up.