Soil pH in Washington, OH: Lime or Sulfur?

Typical topsoil pH in Washington, OH

Typical topsoil in Washington, OH is pH 5.34, too acidic for vegetable garden. Expect roughly 8.4 lb of lime per 100 sq ft, but only after a soil test confirms it.

What Washington needs, by plant

• Already in range: potatoes, blueberries, azaleas and rhododendrons, blue hydrangeas.
• Just outside, test first: strawberries (off by 0.2).
• Lime: lawn (cool-season grass) 8.4 lb/100 sq ft over 2 applications; vegetable garden 8.4 lb/100 sq ft over 2 applications; tomatoes 8.4 lb/100 sq ft over 2 applications; roses 8.4 lb/100 sq ft over 2 applications; pink hydrangeas 6.3 lb/100 sq ft over 2 applications.

What to do next

If your test confirms pH near 5.34, spread about 84 lb of ground limestone per 1,000 sq ft of vegetable bed in 2 doses, ideally in fall.

How mixed the soil is

Of the 395,568 surveyed acres in Washington, OH, 70% are strongly acidic (below 5.5), 23% are moderately acidic (5.5-6.5), 7% are near neutral (6.5-7.3). Mapped soils run from pH 4.3 to 7.5, a spread of 3.2 units across 436 soil components. 70% of the land falls in one class, so the county figure is a fair first guess for most yards here.

Clay, organic matter and rates

Topsoil here averages 23.7% clay and 2.02% organic matter, which this site treats as loam. Moving it one pH unit takes about 7 lb of lime or 2.3 lb of sulfur per 100 sq ft. 0% of mapped components carry free carbonate (lime already in the ground).

Washington against the rest of Ohio

pH 5.34 is 0.74 below the Ohio median of 6.08. 8 of 88 Ohio counties have more acidic topsoil. Nationally it is more acidic than the US county median of 6.05.

Closest in pH within the state: Scioto (5.26), Pike (5.3), Ashtabula (5.32), Jackson (5.34), Meigs (5.36), Athens (5.52), Tuscarawas (5.53), Guernsey (5.55).

The range in Ohio runs from Monroe at 5.02 to Wood at 6.6; Washington sits 20% of the way up.